Filter By:
Headsets
$119.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS42/28.6/H9/x
• Top Type: IS- Integrated
• Top Head Tube Inside Dia.: 42.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 T Aluminum
• Weight: 41.81g
$225.99 - $299.99
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.
$84.99
Service and replacement parts specifically for Trek Knock Block technology.
Genuine replacement parts
Get your bike back on the trail with the headset parts you need.
- Trek proprietary headset components compatible with Trek Knock Block models
- 72-degree headset fits 2021 Slash 29
- Includes crown race, bearings, top cover, frame chip & fastener
- Frame chip has display tabs to connect Bosch Kiox Mount sold separately
- Must be paired with Knock Block stem and Knock Block spacers
- Knock Block headset spacers not included
$347.00
Chris King DropSet 3 Headset.
- Crown Race: 30
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
- Bearing Type: Cartridge
- S.H.I.S Lower: IS52
- S.H.I.S Upper: IS41
$89.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$120.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly. This version uses a ZeroStack top cup and an external cup on the bottom.
$99.99 - $114.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$109.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS56/30/H4/K
• Top Type: ZS - Zero Stack Cup
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 20.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 97g
$67.99
This is the Integrated Bottom Bearing for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$179.50
- Carbon fiber top cover
- Upper: Campagnolo angular contact bearings (black seal)
- 1-1/8-inch, 45 degrees/ 45 degrees ACB upper
- 1.5-inch, 36 degrees/ 45 degrees ACB lower
- For tapered 46mm/56mm OD headtube
- For 1-1/8-inch to 1.5-inch tapered fork
$182.99
The Absolute Best
Well over a decade ago, we set out to make the best premium headset on the market. With our 110 Series, we did just that, utilizing optimal materials, the most effective seals and the best aesthetics.
With the flexibility to purchase complete assemblies or separate Tops and Bottoms, tops are available in either short (9mm) or tall (15mm) stack height bearing covers, the 110-Series offers a premium solution for nearly all straight and tapered configurations on the market today. From Integrated (IS) Tops to External Cup (EC) Conversion Bottoms and everything in between, you can mix and match your headset purchase to best meet your needs.
- Technical Description: 110-Series IS41/28.6/H9 | IS52/40
- Top Type: IS - Integrated
- Top Head Tube Inside Dia.: 41.1mm
- Stem Clamp Dia.: 28.6mm
- Top Stack Height: 9mm
- Top Bearing Type: Top-quality, sealed stainless steel bearings
- Bottom Type: IS - Integrated
- Bottom Head Tube Inside Dia.: 52.1mm
- Crown Race Seat Dia.: 39.79mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 1mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: N/A
- Weight: 79.48 grams
$39.50 - $109.50
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup
- Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings
- Big Fat Pig feature super oversized caged ball bearings
- Pig: External Cup, traditional
- Pig S.H.I.S.: EC34/28.6|EC34/30
- Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40
- Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro)
- Color: Black
- Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)
$11.99
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$109.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6|EC44/40
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.0mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.0mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
$99.99
- Bearing Type: Cartridge
- Weight: 125g
- Crown Race: 40
- S.H.I.S. Lower: ZS56
- S.H.I.S. Upper: ZS44
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$31.99 - $63.99
- No. series headsets offer excellent performance and value
- No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications
- No. 10 S.H.I.S.: ZS44/28.6|ZS44/30
- No. 8B S.H.I.S.: IS42/28.6|IS42/30
- Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B)
- Color: Black
- Weight: 93g (No. 10), 74g (No. 8B)
$59.99
Authentic replacement Trek parts.
Genuine replacement parts
Get your bike back in action with a quality replacement headset.
- 1-1/2in. Lower bearing
- Angular contact bearings
Page 1 of 1