650B/27.5-Inch

THE ORIGINAL: The archetypal high quality touring tire. The highly elastic GreenGuard layer is 3mm thick. One third of the GreenGuard is made up of recycled latex products. The "Anti-Aging" sidewall can withstand the typical cracking that results from overloading due to insufficient inflation pressure for much longer. E-BIKE READY. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50). - Very good puncture protection thanks to GreenGuard - Especially suitable for asphalt - Available in many sizes - Performance line - E-rating: E-25 - 800g

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

- Smart DualGuard Protection - Addix-E Compound - ECE-R75 certification makes the tires ready for E-Bikes of all classes

The Gravelking SK maintains its position as the benchmark against which all gravel tires are measured. - Ideal for gravel, dirt, and rough pavement - TuffTex boasts a supple, high thread count casing fortified with precisely engineered bead-to-bead puncture protection - BeadLock is engineered to accommodate a broader range of rims, including both hookless and clincher types. In most instances, mounting the tire can be effortlessly achieved with a standard floor pump - ZSG GRAVEL Compound is crafted from a proprietary ZSG (Zero Slip Grip) material to ensure remarkable resistance to temperature and weather fluctuations. This consistent rubber performance across a spectrum of temperatures provides lower rolling resistance and improved grip - Folding (Aramid) Bead - Tubeless and Hookless Compatible in widths 700 x 30C and wider, and all 26", 650B/27.5" and 29” versions

- Medium profile and tread spacing for riding quickly and confidently over a mixed variety of terrains, from hard to soft, whether for dry or wet - SpeedGRIP Compound formulation for on and off-road rolling efficiency coupled with high tear resistance and high wet grip - High-strength woven Nylon fabric from bead to bead for added cut and puncture protection - Multi-ply 127tpi Nylon casing construction - Tubeless-ready aramid folding bead optimized for wide rims and lower pressure riding

More rocks. More roots. No problems. Brevard RSL XT is a durable all-around trail tire that packs bead-to-bead and pinch cut protection into a package that's ready to take on rocks and roots with no problem. RSL XT Construction provides a supple 120TPI casing that's paired with bead-to-bead and apex puncture protection. A trail triple-compound delivers the ultimate combination of grip and speed with a firm and supportive base compound to maintain rolling speed, a softer center tread for braking and climbing traction, and even softer side knobs for ultimate bite in corners. Product details: - An all-around trail tread that provides grip in mixed and loose conditions - RSL XT Construction: 120TPI casing with bead-to-bead and apex puncture protection - Trail Triple-Compound: medium center, soft shoulder and supportive base - Tubeless Ready (TLR) for easy tubeless setup and puncture protection

A dependable and versatile replacement tire that delivers traction on paths and trails yet rolls smooth and is efficient on pavement. STAY CONNECTED TO PATH The Connection Comp MTB Tire delivers confidence and traction on everything from city paths, trails, and even urban commutes. Smaller and more compact center knobs offer lower rolling resistance for a fast rolling tire while larger, more aggressive side knobs provide the traction over loose terrain and cornering confidence. PRODUCT DETAILS - Designed for trail, path, and street with a smooth-rolling tread for confident traction - Smooth-rolling center tread provides the perfect balance of traction and efficiency - Pronounced side tread adds confidence across unpaved trails and when cornering - A great option to replace your worn out tires with

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. The Assegai offers predictable traction, even over slippery roots and rocks. - World Cup Champion Greg Minnaar's signature tire - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Wide Trail (WT) construction optimizes the tire’s tread layout and profile on today’s modern, wider rims, optimized around a 35mm inner width

Legendary tire designer Frank Stacy provides another race-proven mountain bike tire design in the XR2. The value-minded and super-versatile XR2 Comp offers outstanding quickness and cornering stability on hard-packed or loamy cross country courses. - A versatile trail tire that excels in loose-over-hardpack and firm conditions - Fast rolling with consistent, predictable traction for a variety of trail conditions

The Cinturato Gravel H (Hard Terrain) is a gravel-specific tire designed for compact terrain and the hardest surfaces. The tread features low, tightly packed knobs and elevated ability to adapt to the terrain, offering a large contact area and therefore excellent feel while riding. - SpeedGRIP Compound adds features of mechanical resistance and chemical grip without compromising the rolling efficiency - High-performance tire with unique characteristics of grip in all weather conditions, be they dry or wet, plus a high level of puncture protection - TechWALL high-strength woven nylon fabric from bead to bead for added cut and puncture protection - TLR tubeless-ready aramid folding bead optimized for wide rims and lower pressure riding

Hurricane rolls fast and noiselessly, offering sufficient traction for short off-road excursions.

The Grand Prix 5000 S Tubeless Ready allrounder tires are lighter, faster and supported with stronger sidewalls. Designed to be compatible with hooked and hookless rims, this new standard in road tubeless ready technology will allow you to ride faster, more comfortable and with increased puncture protection. - Tubeless ready (TR) carcass construction is robust and impervious against damage and penetration from foreign objects - Hookless rim compatible up to 73 PSI / 5 bars - Vectran Breaker is spun from liquid crystal-polymer to create a multiple-thread thermoplastic yarn. This partially crystalline fabric is more cut-resistant than aramid and its tensile strength is five times higher than that of steel. A Vectran Breaker is lighter, more flexible and effective against cuts than a comparable nylon breaker, without affecting rolling resistance - Lazer Grip, to make you one with the road. The lazered micro profile structure expands over the tire’s shoulder and provides outstanding cornering - Active Comfort Technology (ACT) takes a revolutionary approach in cycling; embedded in the tire construction to absorb vibrations and smoothens your ride - Black Chili Compound features special synthetic rubbers combined with proven natural rubber to high-performance tread mixtures, to optimize rolling properties and grip

Durable yet lightweight construction for confident traction in aggressive conditions and quick climbs back to the top. Rubber that rails The XR5 Team Issue is a lightweight trail MTB tire designed for maximum braking and cornering traction without compromising rolling speed. The dual-block center tread and aggressive side tread delivers a versatile tire that performs well in both the front and rear. The TM-Grip rubber compound bites harder and the Inner Strength construction offers lightweight sidewall protection. Product details - An aggressively treaded MTB tire with a lightweight construction for confidence in any terrain - Dual-blocked center tread with aggressive side knobs for confident cornering and braking traction - Proprietary TM-Grip compound and 60 TPI construction offers great traction and tire feel - Supple and strong Inner Strength casing provides lightweight sidewall protection - Tire bead chafer layer adds additional protection against abrasion and punctures - Tubeless Ready (TLR) for easy tubeless setup and puncture protection

The legendary High Roller returns with an all-new hybrid tread design, built to take on mixed conditions at high speeds. The center tread uses a mid-spike design similar to the Shorty but with a lower knob height. These knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces. Cornering traction is enhanced via large, well-supported side knobs for predictable handling. - Recommended for intermediate enduro and downhill conditions - Tubeless ready construction, designed for front or rear use - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - Widely-spaced tread of the High Roller clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - 3C MaxxGrip + Downhill casing is ideal for Downhill racing and long travel e-bikes - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

This e-bike tire is designed for versatility with light tread for confident, smooth-rolling traction and approved for the unique demands of e-bikes at speeds up to 50km/h. E-bike approved The LT4 is an e-bike specific tire designed for confident traction and smooth-rolling performance for the speeds and needs of e-bike riders. The lightly treaded design adds versatility for both on and off the tarmac and is approved for electric bike use up to 50km/h. Reflective sidewalls increase visibility and the Hard-Case Lite puncture protection is optimized for the increased speeds and demands of e-bike riders. Product details - Designed for trail, path, and street with a smooth-rolling tread for confident traction - E-bike approved for speeds up to 50km/h - Designed to meet the unique demands of electric bike usage - Hard-Case Lite optimized for e-bikes with 1mm Kevlar puncture protection belt that offers great ride feel, and extra durability - Reflective sidewall strips for added visibility Specifications - TPI: 60 TPI - Durometer: 60a - Bead: Wire - Type: Clincher - Minimum pressure: 30psi - Max pressure: 50psi - ETRTO: 60-584 - Puncture protection: Hard-Case Lite - Studdable: No - Weight: 905g

Guaranteed Grip and Control In All Situations - Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control - Literally sticks to the ground as the tire deforms more precisely - Tread Pattern optimized for radial carcass: Many lugs for maximum grip and great durability - Control in all situations

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

This semi-slick tire borrows its tread design from the trail version of the Rekon, but with smaller and shorter knobs. Use it as a rear tire paired with a more aggressive front tread, or front and rear for short-track racing. - Semi-slick XC race tire

- Great value off road tire - High volume casing for comfort and performance - 30tpi nylon casing

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

An e-bike tire designed for smooth-rolling confidence and approved for the unique demands of eBikes at speeds up to 50km/hr. E-bike approved The E-6 is an e-bike specific tire designed to offer confident traction and lasting performance for the speeds and needs of eBike riders. The E-6 is approved for electric bike use up to 50km/hr. Reflective sidewalls increase visibility and the Hard-Case Lite puncture protection is optimized for the increased speeds and demands of eBike riders. Product details - Designed for city and pavement with a smooth-rolling tread that offers confident traction - E-bike approved for speeds up to 50km/hr - Designed to meet the unique demands of electric bike usage - Hard-Case Lite optimized for e-bikes with 1mm Kevlar puncture protection belt that offers great ride feel, and extra durability - Reflective sidewall strips for added visibility - 60 TPI - Wire bead - Clincher

Discover a new way to get to your destination. The Connection Trail mountain bike tires deliver ride-refining confidence for journeys along a well-worn trail, and offer plenty of comfort when the path leads you to the road less traveled. Key features - Excels on pavement and the trail - Great value

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Completely renewed, sporting a dynamic tread pattern design. Matches with a race bike, as well as a classic city road bike. Available in a wide range of dimensions and colors. PureGrip Compound Based on activated silica compounds, this technology was originally intended as an performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. Whilst providing great grip, it is also long lasting and highly durable – both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). Suitable for E-Bikes For our E-Bike tyre we fall back on over 100 years' experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high quality structure, puncture protection is high and the rolling resistance is low offering protection from premature wear brought about by the additional driving force.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving TOTAL CONFIDENCE for All Riders. Tire Widths: 2.1"-2.6" Inner Rim Width: 22mm-35mm Includes: (1) CushCore tire insert, (1) 44mm CushCore presta air valve, valve core tool, installation instructions, and rim stickers.

- Whether you're travelling on tarmac or trail, the beefy Super Moto-X offers you the best riding characteristics and plenty of comfort. - The 3 mm Green Guard puncture protection and reinforced sidewalls lets you reach your destination safely, even in the toughest conditions.

- The new incarnation of the Minion DHR. Ready to shred any line - Excellent cornering traction - Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo! - Plus sizes available - Wide Trail casing optimized for 30—35mm rims