Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Other

$65.00
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.
$31.99
When top EWS Pro Riders ask you to develop a stiffer, more durable fork axle, you listen. The stock 15mm axles and other lightweight aftermarket options were simply not tough enough for their race bikes. We don't quite ride at the pace of an EWS Pro, but we loved the simplicity and clean look of the axle so we made them available to buy. We've replaced the QR lever with a simple 6mm hex. If you already carry the EDC multitool with you, there's no need for the heavy and bulky QR lever
$6.39 - $8.00
ONLY COMPATIBLE WITH THE ONEUP REMOTE V3 Kit includes 1 dropper remote cushion
$33.00 - $37.50
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers
$27.00
Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-SPEC-II brakes - Not Compatible with Shimano I-SPEC-A or B - Does not contain remote body.
$19.99
V2 dropper remote clamp for 22.2mm handlebar.
$79.99
Eliminate dropped chains forever with the new OneUp Components Guide. As the trend for lower and slacker bikes continues, 'Little bikes' are getting more and more capable everyday. Revised for 2019 the OneUp Guide uses simple, one tool installation and adjustment as well as an all new tool less flip At only 40g the OneUp Chain Guide weighs less than a sip of water. WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING? NW rings are awesome, but they're not perfect and every once in a while you can drop a chain while riding. On a social ride this means getting dropped by your friends. But when racing an Enduro a dropped chain can cost you the podium, which is why almost every EWS pro runs both a chainguide and narrow wide chainring. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment (4mm hex) - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 40g - Capacity: 26-38T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic
$24.50
This kit includes all the parts required to rebuild your V1 Dropper Post. - Replacement Seal - Upper and lower bushings - Anti-rotation pins - Compatible with V1 Dropper Post ONLY. We have found that ~95% of posts with slow top out were caused by low air pressure. Please make sure to check this first and do so with the post fully extended. Proper air pressure is 280-300psi at full extension, and the valve is located under the top clamp. If you are still having slow top out then there is a possibility that the upper white bushing needs replacement. This will be evident by the original bushing being difficult to reinstall after being removed.
$59.99
UPGRADE ANY DROPPER The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. It's the easiest way to upgrade any mechanical dropper. REPLACEABLE RUBBER THUMB PAD A grippy rubber thumb pad improves lever feel and can be colour matched to your bike. The integrated cable port with cut marks makes installing your remote even easier. It also keeps your cable end tidy and lets you install without a cable crimp for a super clean look. LIGHTER ACTION DESIGN The new lever cam reduces the thumb force needed to actuate your dropper post. It requires 27% less actuation force than our V2 remote. Upgrading your remote is a quick and easy way to improve the feel of any mechanical dropper post for less than $50. EASY INSTALL The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. The integrated cable port includes cut marks that take the guess work out of cutting your cable and lets you tuck the cable away for you a super clean look. Compatible with all cable actuated dropper posts. KIT INCLUDES 1 Remote body 1 black thumb cushion Cable, housing, cable end & barrel end
$129.99
Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic
$69.50
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.
$19.50
Depending on the variant selected, these clamps/adapters allow users to mount their OneUp Components Dropper Remote (V2 or V3) to their Shimano I-SPEC-II brake lever (I-SPEC-II Adapter), Avid/SRAM MMX bar mount (SRAM MMX Adapter), Shimano I-Spec EV (I-Spec EV Adapter), flat bars (22.2 Clamp), or drop bars (31.8 clamp). The SRAM MMX, Shimano I-Spec EV, and the I-SPEC-II Adapters are not a clamps - these adapters allows the mounting/attachment of the remote body to a riders pre-existing clamp/brake mount. The 31.8 Clamp and the 22.2 Clamp are stand-alone clamps - these clamps allows the mounting/attachment of the remote body to a riders bars who do not have or do not want to attach the dropper remote body to a pre-existing clamp/brake mount. This product does not contain a remote body. This product is not a universal product, it will only work to attach/mount a OneUp Components Dropper Remote body (V2 or V3). The 31.8 Adapter is for use with drop bars only.
$19.99
Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts. - Does not contain remote body.
$79.99
If you're not looking for chain retention or your bike has an integrated chain guide, you can still add some bash protection with the OneUp ISCG05 Underbash. The Underbash includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). If your bike has three ISCG05 tabs, check with the frame manufacturer to ensure the lower tabs are strong enough for a bash application. Failure to do so could result in frame damage. FEATURES - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) SPECS - Weight: 68g 32-34T - Capacity: 28-36T - Chainline: 2.5mm adjustment - Mount: ISCG05 2-Bolt ONLY - Color: Black - Material: 7075 aluminum, glass reinforced thermoplastic
$19.99
Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with SRAM MatchMakerX (MMX) or Shimano I-Spec EV (M9100) brake mounts. - Does not contain remote body.
Page 1 of 1