Skip to main content

Filter By:

Full-Suspension

$9,799.00 - $13,549.00 $13,549.00 Up to 28% Off
THE MOUNTAIN BIKE, DISTILLED With 29-inch wheels, 145mm of rear Virtual Pivot Point (VPP) travel and a versatile personality, the newest Santa Cruz Hightower delivers mountain bike thrills over a wide range of terrain. Big on wheels, medium on travel, and short on fuss, this do-it-all model shines with a versatile balance of geometry, spec and durability. It’s mountain biking, distilled.
$7,799.00
All the Travel and MX Wheels A downhill bike that goes everywhere Seriously. The Megatower's big wheels, long travel, and tough carbon fiber chassis delivers the high-speed security traits of a downhill bike. Yet the relatively-steep seat tube angle and size-specific geo maintain the Mega's mega pedaling ability-elevating its reputation as the perfect choice for big gravity rides and DH park laps.
$7,799.00
The Mountain Bike, Distilled The newest version of the Hightower remains our greatest hits of engineering—now further refined and bottled into our most all-terrain of bikes. Big on wheels, medium on travel, short on fuss, this is the do-it-all model that does it over and over again thanks to a versatile balance of geo, spec and durability. If you're not looking for extremes, just something extremely good, the Hightower is your elevator. Engineering Details: - OUR ENGINEERS’ GREATEST HITS Not all frames are created equal. Hightower represents Santa Cruz’s greatest hits, showcasing our design, engineering, and performance prowess. - LOWER LINK ASSEMBLY The highly sculpted and optimized Lower Link (A) houses a geometry-adjusting Flip Chip (B) and beefy Pivot Axles (C) to virtually eliminate lateral flex. - UPPER LINK ASSEMBLY We only use the highest quality Enduro MAX or TPX sealed, radial bearings (A) and premium fasteners (B) for our linkage assemblies. They’re easy to properly torque and maintain, plus we offer free replacement bearings for life. - ONE-PIECE SWINGARM VPP suspension utilizes a one-piece swingarm that eliminates the need for pivots on the stays, creating a stout, bulletproof rear end for accurate tracking and superior performance. - C AND CC CARBON Santa Cruz offers two grades of carbon—top-end CC Carbon and value-minded C Carbon. Though they have the same stiffness and performance, CC is lighter and comes paired with a more premium suspension. - CARBON MASTERY The Sag Window (A), Glovebox (B), and internal cable tunnels (not shown) demonstrate Santa Cruz’s expertise in combining practical function with carbon design and manufacturing artistry. - THE SUM OF THE PARTS In isolation, all these things are great—together with fanatical suspension tuning, a premium build spec, and meticulous attention to detail, they’re transcendent.
$6,749.00 - $7,799.00 $7,799.00 Up to 13% Off
If in doubt, take a Bronson out From flat out on the TR to fully flat over a table, if you wanna send it the Bronson delivers. The 150mm-travel bike can go deep on any landing and the VPP suspension design makes sure that there's no wasted energy when heading back up for another go. If you value style at speed or want to have fun feeling fast, then mixed wheels (29" up front, 27.5" out back) are the right choice. The larger front wheel provides more traction and stability that'll make you feel more confident squaring off the turns and diving for the inside lines. But a 27.5-inch tire in the rear means this bike still loves getting up on the back wheel and into the air.
$7,999.00 - $9,249.00 $9,249.00 Up to 14% Off
THE MOUNTAIN BIKE, DISTILLED The newest version of the Hightower remains our greatest hits of engineering - now further refined and bottled into our most all-terrain of bikes. Big on wheels, medium on travel, and short on fuss, this is the do-it-all model that does it over and over again thanks to a versatile balance of geo, spec, and durability. If you’re not looking for extremes, just something extremely good, the Hightower is your elevator. Engineering Details: - OUR ENGINEERS’ GREATEST HITS Not all frames are created equal. Hightower represents Santa Cruz’s greatest hits, showcasing our design, engineering, and performance prowess. - LOWER LINK ASSEMBLY The highly sculpted and optimized Lower Link (A) houses a geometry-adjusting Flip Chip (B) and beefy Pivot Axles (C) to virtually eliminate lateral flex. - UPPER LINK ASSEMBLY We only use the highest quality Enduro MAX or TPX sealed, radial bearings (A) and premium fasteners (B) for our linkage assemblies. They’re easy to properly torque and maintain, plus we offer free replacement bearings for life. - ONE-PIECE SWINGARM VPP suspension utilizes a one-piece swingarm that eliminates the need for pivots on the stays, creating a stout, bulletproof rear end for accurate tracking and superior performance. - C AND CC CARBON Santa Cruz offers two grades of carbon—top-end CC Carbon and value-minded C Carbon. Though they have the same stiffness and performance, CC is lighter and comes paired with a more premium suspension. - CARBON MASTERY The Sag Window (A), Glovebox (B), and internal cable tunnels (not shown) demonstrate Santa Cruz’s expertise in combining practical function with carbon design and manufacturing artistry. - THE SUM OF THE PARTS In isolation, all these things are great—together with fanatical suspension tuning, a premium build spec, and meticulous attention to detail, they’re transcendent.
$9,249.00
ALL THE TRAVEL AND MX WHEELS Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, drive to the bike park, and do laps on laps. Hell, you could even rock up to the startline of the world's wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. The only thing it needs is a rider willing to press send. Design Details: - 170mm travel All the travel anyone needs in a single-crown bike intended for the steepest and deepest of trails. - Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the Nomad's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse to keep your tools close to hand. - Proportional geometry Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. - MX wheels The mixed wheel configuration of a 29-inch wheel up front provides traction and stability, while the 27.5-inch rear wheel allows for quick back wheel steering and lifting. Mixing the best of both worlds. - Flip your chip In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support. - Frame stiffness tuned by size Bigger riders mean bigger stresses on bigger frames. So we tailor stiffness for every size to make sure everyone gets the same ride quality. - Details matter The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes. - VPP™ VPP™ suspension can be optimized to strike a balance between pedaling efficiency and all-out bump-chomping prowess. The Nomad is exceptional at absorbing the biggest hits so its rider can charge harder, with more confidence, in the very worst terrain. But because it's still pedal efficient, getting up to the best, highest trails isn't a chore like some other bikes. - All the travel If you're stomping gaps and stamping passports you're no stranger to travel. 170mm of 38mm diameter fork and 170mm of VPP™ rear suspension, compatible with both coil and air shocks. - Sensitivity and constant traction On the Nomad, lowering the anti-squat reduced pedal kickback on big square-edge hits at speed, all while improving the overall sensitivity of the suspension to maintain traction at all speeds. Up and downhill. - Flat-out bump control and tracking By reducing the starting leverage of the latest Nomad, we were able to improve body-weight-influenced geometry stability throughout the travel. Reducing progression allowed the suspension to have consistently better tracking qualities throughout the stroke. - Built to last Short, stout counter-rotating links connect the front and rear triangles to create an extremely robust chassis that reduces lateral flex. Simple expanding collet axles hold things together, pivots run on large diameter axles and bearings (which we offer free lifetime replacement for) and the lower link includes a grease port for quick, easy maintenance.
$10,499.00
From flat out on the trail to fully flat over a table, if you wanna send it the Bronson delivers. The 150mm-travel bike can go deep on any landing and the VPP™ suspension design makes sure that there’s no wasted energy when heading back up for another go. If you value style at speed or want to have fun feeling fast, then mixed wheels (29" up front, 27.5" out back) are the right choice. The larger front wheel provides more traction and stability that’ll make you feel more confident squaring off the turns and diving for the inside lines. But a 27.5-inch tire in the rear means this bike still loves getting up on the back wheel and into the air.
Page 1 of 1